A fridge is warm can be a costly problem if you do not deal with immediately. So, when your GE refrigerator would not stay cool, it’s in your best interest to find and fix the source of the problem. Fortunately, we are here with a few simple tips that can save time and money on the missing food. Here what to do if you are a GE refrigerator and will not stay cold and if you need any fridge repair in Kolkata, Pune, Mumbai, Delhi, Hyderabad and etc.

The reason why you’re GE Refrigerator will not stay cold

One Refrigerator Temperature Setting

The simplest repair for GE refrigerator was not cold inside is enough to check the temperature setting. If the internal temperature of the refrigerator is set too high, this could be why it was not as cold as it should be.

GE recommends setting your refrigerator temperature to the recommended model you use and care guide that should be somewhere between 35 ° -38 ° F. Use a refrigerator thermometer if your model does not have a digital display showing the temperature inside at this time.

Too Fridge Is Empty

Have a number of items in the refrigerator to help it stay cooler similar to how ice cubes keep drinks cold. Each cubic foot refrigerator has a capacity that is also detailed in the use and care guide.

Like most manufacturers, GE recommends keeping your refrigerator about 3/4 full. Without enough stored items, your refrigerator will have to work harder to get and stay cool.

Fridge Is Too Full

On the other hand, keep your refrigerator too full can also cause serious cooling problems. If this is the case, too many items in the fridge can obstruct air flow between the refrigerator and freezer sections.

Cold air generated in the freezer section and into the fresh food compartment through the vents. By keeping your refrigerator about 3/4 full, you can be sure that these vents do not become blocked.

Refrigerator Door Seal Will not shut

Refrigerator door must be completely sealed shut to keep the cold air in and warm air out. If the door is not closed all the way, or if the door gasket is dirty or damaged, the proper seal cannot be formed.

An easy way to test this is to put a piece of paper between the unit and gasket door, and shut the door. If you can easily pull the paper out, your gaskets need to be cleaned or replaced. Always try to clean it first with a seal wiping with a cloth or sponge and warm water.

GE Refrigerator Coils needs to be cleaned

Because the refrigerator condenser coils are usually hidden, it is difficult to remember that they must be kept clean and free of dust to work efficiently. Over time, dust and debris collects on the coils and can lead to the refrigerator is not working efficiently.

Reduce the cooling efficiency can lead to reduced temperature, and finally the total failure of the cooling system. Luckily, this is a simple problem to prevent! Just follow the instructions step-by-step instructions for how the refrigerator condenser coils clean.

Damaged GE Refrigerator Parts

If all else fails, your refrigerator may have one or more defective components cause your cooling problems. Some of the most commonly broken refrigerator section including evaporator fan motor, condenser fan motors and compressors.

Since replacing these parts requires skill and experience, we would recommend hiring a professional to diagnose and replace major components.

If your GE refrigerator would not stay cold after following these instructions, it may be time to call in the services of a refrigerator repair pro All Electric Care Today. We are standing by to help fix the problem and get your ice cold fridge again! Hire All Electric Care for fridge repair in Pune and etc.